Merck 111718 1000 Silver Nitrate Solution 1 LT.

\n\n\n\n\n\n\n\n\n\n\n\n

Description
Catalogue Number	111718

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Product Information
Grade	Reag. USP
HS Code	2843 21 00
Quality Level	MQ200

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Physicochemical Information
Density	1.01 g/cm3 (20 °C)
pH value	6 (H₂O, 20 °C)

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information according to GHS
Hazard Pictogram(s)	\n\n
Hazard Statement(s)	H360D: May damage the unborn child.\nH410: Very toxic to aquatic life with long lasting effects.
Precautionary Statement(s)	P202: Do not handle until all safety precautions have been read and understood.\nP273: Avoid release to the environment.\nP280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.\nP308 + P313: IF exposed or concerned: Get medical advice/ attention.\nP391: Collect spillage.\nP405: Store locked up.\nP501: Dispose of contents/ container to an approved waste disposal plant.
Signal Word	Danger
Storage class	6.1D Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous materials causing chronic effects
WGK	WGK 3 highly hazardous to water
Disposal	27\nResidues containing valuable recoverable metals should be forwarded for recycling. Container H.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information
Categories of danger	dangerous for the environment

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Transport Information
Declaration (railroad and road) ADR, RID	UN 3082 , 9, III
Declaration (transport by air) IATA-DGR	UN 3082 , 9, III
Declaration (transport by sea) IMDG-Code	UN 3082 , 9, III, Marine Pollutant: P

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Specifications
Form	liquid
Amount-of-substance concentration	0.04975 - 0.05025
Measurement uncertainty	+/- 0.00015
Traceability	NIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.\nThe concentration is determined by volumetric titration and refers to 20°C.\nThe amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 999 potassium chloride) by means of volumetric standard sodium chloride (article number 1.02406), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.\nNote: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.