Merck 108597 2500 Hydrogen Peroxide Solution 30% Medical, Extra Pure, Stabilized Ph Eur,Bp,Usp 2,5 LT.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Description
Catalogue Number	108597
Synonyms	Perhydrol

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Product Information
Grade	Ph Eur,BP,USP
HS Code	2847 00 00
Quality Level	MQ500

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Physicochemical Information
Boiling point	107 °C (1013 hPa)
Density	1.11 g/cm3 (20 °C)
Melting Point	-26 °C
pH value	2 - 4 (H₂O, 20 °C)
Vapor pressure	18 hPa (20 °C)

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information according to GHS
Hazard Pictogram(s)	\n
Hazard Statement(s)	H318: Causes serious eye damage.
Precautionary Statement(s)	P280: Wear eye protection/ face protection.\nP305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nP501: Dispose of contents/ container to an approved waste disposal plant.
Signal Word	Danger
Storage class	5.1B Oxidizing hazardous materials
WGK	WGK 1 slightly hazardous to water
Disposal	22\nInorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information
Categories of danger	harmful, irritant

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Storage and Shipping Information
Storage	Store at +2°C to +25°C.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Transport Information
Declaration (railroad and road) ADR, RID	UN 2014 , 5.1 (8), II
Declaration (transport by air) IATA-DGR	UN 2014 , 5.1 (8), II
Declaration (transport by sea) IMDG-Code	UN 2014 , 5.1 (8), II, Segregation Group: 16 (Peroxides)

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Specifications
Assay (manganometric)	29.0 - 31.0 %
Identity	passes test
Acidity (according to Ph Eur)	passes test
Acidity (according to USP)	passes test
Chloride (Cl)	≤ 0.005 %
Phosphate (PO₄)	≤ 0.05 %
As (Arsenic)	≤ 0.0003 %
Cu (Copper)	≤ 0.002 %
Pb (Lead)	≤ 0.001 %
Pd (Palladium)*	≤ 0.0001 %
Sn (Tin)*	≤ 0.0060 %
Zn (Zinc)	≤ 0.002 %
Residual solvents (ICH Q3C)	...excluded by production process
Organic stabilizers	≤ 0.045 %
Non volatile matter (105 °C)	≤ 1.5 mg/ml
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Corresponds to Ph Eur, BP, USP\nContains 0.00075 % Na₂Sn(OH)₆, 0.00735 % CH₃C(OH)[PO(OH)₂!₂, 0.0015 % NH₄NO₃ and 0.0003 % K₄P₂O₇ as preservatives.
Corresponds to Ph Eur, BP, USP\nContains 0,015 % Na₂H₂P₂O₇, 0,01 % H₃PO₄, 0,006 % NH₄NO₃ as preservatives.