Merck 100063 2511 (Plastik Ambalaj) Acetic Acid (Glacial) 100% Anhydrous Gr For Analysis Acs,iso,Reag. Ph Eur 2,5 LT.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Description
Catalogue Number	100063
Synonyms	Ethanoic acid

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Product Information
CAS number	64-19-7
EC index number	607-002-00-6
EC number	200-580-7
Grade	ACS,ISO,Reag. Ph Eur
Hill Formula	C₂H₄O₂
Chemical formula	CH₃COOH
Molar Mass	60.05 g/mol
HS Code	2915 21 00
Structure formula Image
Quality Level	MQ300

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Physicochemical Information
Boiling point	116 - 118 °C (1013 hPa)
Density	1.04 g/cm3 (25 °C)
Explosion limit	4 - 19.9 %(V)
Flash point	40 °C
Ignition temperature	485 °C
Melting Point	16.64 °C
pH value	2.5 (50 g/l, H₂O, 20 °C)
Vapor pressure	20.79 hPa (25 °C)
Viscosity kinematic	1.17 mm2/s (20 °C)
Solubility	602.9 g/l soluble

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Toxicological Information
LD 50 oral	LD50 Rat 3310 mg/kg

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information according to GHS
Hazard Pictogram(s)	\n\n
Hazard Statement(s)	H226: Flammable liquid and vapour.\nH314: Causes severe skin burns and eye damage.
Precautionary Statement(s)	P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.\nP233: Keep container tightly closed.\nP240: Ground and bond container and receiving equipment.\nP280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.\nP303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.\nP305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word	Danger
RTECS	AF1225000
Storage class	3 Flammable liquids
WGK	WGK 1 slightly hazardous to water
Disposal	4\nLiquid organic acids or solutions should be diluted, if necessary, and carefully neutralized with sodium hydrogen carbonate (Cat. No. 106323) or with sodium hydroxide (Cat. No 106462). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535).

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Safety Information
Categories of danger	flammable, corrosive

\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Transport Information
Declaration (railroad and road) ADR, RID	UN 2789 , 8 (3), II
Declaration (transport by air) IATA-DGR	UN 2789 , 8 (3), II
Declaration (transport by sea) IMDG-Code	UN 2789 , 8 (3), II, Segregation Group: 1 (Acids)

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n

Specifications
Assay (alkalimetric)	≥ 99.8 %
Identity	passes test
Color	≤ 10 Hazen
Acetaldehyde	≤ 2 ppm
Acetic anhydride	≤ 100 ppm
Titratable base	≤ 0.0004 meq/g
Solidification temperature	≥ 16.3 °C
Chloride (Cl)	≤ 0.4 ppm
Phosphate (PO₄)	≤ 0.4 ppm
Heavy metals (as Pb)	≤ 0.5 ppm
Sulfate (SO₄)	≤ 0.4 ppm
Ag (Silver)	≤ 0.005 ppm
Al (Aluminium)	≤ 0.020 ppm
As (Arsenic)	≤ 0.010 ppm
Au (Gold)	≤ 0.010 ppm
B (Boron)	≤ 0.100 ppm
Ba (Barium)	≤ 0.010 ppm
Be (Beryllium)	≤ 0.005 ppm
Bi (Bismuth)	≤ 0.050 ppm
Ca (Calcium)	≤ 0.100 ppm
Cd (Cadmium)	≤ 0.020 ppm
Co (Cobalt)	≤ 0.010 ppm
Cr (Chromium)	≤ 0.020 ppm
Cu (Copper)	≤ 0.010 ppm
Fe (Iron)	≤ 0.050 ppm
Ga (Gallium)	≤ 0.050 ppm
Ge (Germanium)	≤ 0.020 ppm
Hg (Mercury)	≤ 0.005 ppm
In (Indium)	≤ 0.050 ppm
K (Potassium)	≤ 0.100 ppm
Li (Lithium)	≤ 0.010 ppm
Mg (Magnesium)	≤ 0.050 ppm
Mn (Manganese)	≤ 0.010 ppm
Mo (Molybdenum)	≤ 0.010 ppm
Na (Sodium)	≤ 0.200 ppm
Ni (Nickel)	≤ 0.020 ppm
Pb (Lead)	≤ 0.010 ppm
Pt (Platinum)	≤ 0.100 ppm
Sn (Tin)	≤ 0.050 ppm
Sr (Strontium)	≤ 0.010 ppm
Ti (Titanium)	≤ 0.050 ppm
Tl (Thallium)	≤ 0.020 ppm
V (Vanadium)	≤ 0.010 ppm
Zn (Zinc)	≤ 0.030 ppm
Zr (Zirconium)	≤ 0.050 ppm
Substances reducing potassium dichromate	passes test
Substances reducing potassium permanganate	≤ 20 ppm
Evaporation residue	≤ 5 ppm
Water	≤ 0.2
Dilution test	passes test
Minimum shelf life: see product label